CUGV-1020
Graphics (computer) to Video (STANAG 3350) video
converter.
CUGV-2020 Video (STANAG 3350) to VGA,
DVi & HD.
This specification applies to the
Conversion Unit Graphic Video CUGV-1020-xx-yy and its
variants.
The unit is designed as a stand alone
unit or for fitting an AVDU series display where it
is mounted on the rear face of the display using an
adaptor plate that locates on the monitor rear mounting
holes.
The scan converter accepts computer
graphics video and HDTV signals. It converts computer
graphics video signals up to UXGA (1600 x 1200) or
component HDTV signals to composite and S-Video (Y/C)
signals simultaneously in either PAL or NTSC format.
The unit may be fitted with an optional STANAG 3350B/C
driver card providing coaxial or differential RGsB
signals.
Typical Applications:
• Any
application where high quality conversion of graphical
data signals to video signals is required.
HD
conversion to SD video Features :
• HDTV Input Compatibility
- 480P, 576P, 720P, 1080i.
• Computer Graphics
Input Compatibility - up to 1600 x 1200.
• Auto
Set Up Technology - One button auto setup that automatically
sizes, shifts, and centres any input image on the display
device.
• Proc-Amp – Internal Colour, hue,
sharpness, contrast, and brightness controls.
• Multi-Standard
Output - PAL or NTSC (factory selectable).
• Multi-Format
Output - Composite video and S-Video (Y/C) simultaneously.
• Flicker
Reduction.
• Over Scan or Under Scan (factory
selectable)
• Freeze Frame (option)
Specifications
INPUTS: 1 x VGA/SVGA/XGA/UXGA, analogue component HD
(480p, 720p, 1080i) Input format selectable RGB or
YPrPb (YUV ) (Optional controls or Factory-selectable)
OUTPUTS: Up to three simultaneous signals: 1x composite
video 1Vpp/75Ω 1x Y/C (s-Video) 1Vpp/75Ω (Y),
0.3Vpp/75Ω (C) 1x RGsB to STANAG-3350 (Option)
OUTPUT STANDARDS: PAL, NTSC (Optional controls or Factory-selectable).
STANAG-3350 B or C (Optional controls or Factory-selectable).
MAX.
OUTPUT LEVEL: 1Vpp. S/N RATIO: 49dB. CONTROLS:
(Option) Option for 4 External buttons – Menu,
Enter/Auto, Freeze/Minus, OS-US/Plus OSD: ProcAmp video
controls, Freeze, Underscan/Overscan, Auto-image, 8
colour bars. POWER SOURCE: 28VDC,300mA Max. DIMENSIONS:
See drawing Mass: <1kg. approx.
Additional options 5.1 Coaxial RGsB output option
(STANAG 3350 coax) The Unit may be fitted with an optional
line driver board to provide coazially driven video
signals over a coaxial cable with an input impedace
of 75 ohms 5.2 Differential RGsB output option (STANAG
3350 differential) The Unit may be fitted with an oprtional
line driver board to provide diferentially driven video
signals over twisted pairs with an input impedace of
75 ohms. Typical driver circuit using an EL2140 Driver.
IN -Out -0V-5VREFVideoEL2140IN +Out ++5V37.4ohm37.4ohm
[Return to top of page]
